Know About 10 Compelling Benefits of Plywood
Plywood was first introduced in the 20th century, and it has come a long way, since then. For decades plywood was often seen as nothing but just as a substitute for solid wood. But now it has become the primary choice for many builders and homeowners. Not to mention, plywood is versatile and used in many places.
Today, if we are surrounded by beautiful work and interior designs, which is possible because of plywood otherwise, we all are aware of how difficult it can be to work on solid wood. This is why you should start searching for top commercial plywood manufacturers to make your space aesthetically wonderful.
Here are the top 10 benefits of plywood in comparison to solid wood, including one that is pretty crucial in this world full of pollution.
1.Strong and Versatile Material
You are absolutely right if you believe that solid wood is strong. However, whether you believe it or not, plywood is much stronger than solid wood. Plywood has arguably solved all the inherent issues with the strength of natural wood. As plywood has a cross-grained nature to its structure, the strength is well and evenly distributed. On the other hand, solid wood tends to be just stronger along the grain.
Moreover, plywood becomes stronger with the usage of veneers and strong phenolic adhesives. Due to the uniform strength, it also has greater density than any other material.
As plywood boasts of uniform strength along grains, regardless of direction. This, along with the usage of good veneers and adhesives, makes plywood very good at resisting sharp and all sorts of in-service blows. As it is stronger than Particle Board and MDF board, making it more reliable and durable for the purpose of long-lasting furniture and any type of wooden material.
The more something looks good, the more people prefer it. Only a few people can argue against the fact that plywood looks really great. Plywood looks just as great as real wood with its panel typically covered with solid wood. To make it look even better, most people use good-quality veneer. Not to mention, the lightweight feature of plywood, adds up to its beauty.
4.Comes in Large Sizes as Compared to solid wood
This is one of the best benefits that come with plywood. In the case of solid wood, no single piece of wood would be enough to allow you to make furniture. But on the other hand, the standard plywood sheets, come in large sizes generally, with lengths of at least 1800 mm and widths at 1200 mm. This size of engineered wood is certainly enough for many things.
5.Covers a Much Bigger Area
As plywood comes in larger sizes, it follows that it has it over any other type of wood, like solid wood, when it comes to square foot coverage. Only one standard size plywood sheet would be enough to make sure to cover an area of a certain size. This includes no gaps or uneven ends, even wastage will be very minimal.
6.Great for Curved Surfaces
We all must agree that it is not an easy task to cover a curved area with solid wood. Probably, it is near impossible because if after wasting hours working on that, you will get nothing but bad results; unfinished edges and rough surface. Whereas, on the other hand, plywood can be made to specifically fit the curved surface, that too, easily and smoothly.
7.Value for Money
With so many great qualities and little wastage, you can rest assured to use plywood for any project. As every square inch of a standard plywood sheet can be used. Moreover, transporting plywood is also pretty easy because of its lightweight, so your money can be saved in that department too.
8.Cheaper than Solid Wood
As solid wood is costlier than plywood because of many reasons, such as weight difference, transportation charges, labor charges, etc., it can be seen, when comparing tables made from solid wood, comes out to be more expensive than a table made from plywood.
9.Minimize Waste of Wood
To make a solid wood block, it has to be cut into four slices from sides, which produces a large amount of waste. In comparison, plywood core veneer is made from rotary cut and slice cut machine which is hardly waste wood.
One of the most important and crucial advantages of plywood is that it is eco-friendly. It is certainly not the most environmentally friendly products, but it is the least one to harm the environment in the wooden industry. Surely, plywood uses wood, but manufacturing a workable sheet requires lesser wood than any solid wood product.
That means, next time whenever you are in requirement of wood for your home interior, decor, or any type of furniture then plywood would be the best option, you can go for.
Read also about Important Things To Know Before You Buy A Las Vegas Condo
Thanks for reading about Top 10 Compelling Benefits of Plywood